Article last updated on: Feb 16, 2019

What are perovskites?

Perovskite is a calcium titanium oxide mineral, with the chemical formula CaTiO3, discovered in the Ural Mountains of Russia by Gustav Rose in 1839 and named after Russian mineralogist Lev Perovski (1792–1856).

perovskite image

Perovskites are a class of materials with a similar structure that are easily synthesized and relatively low-cost. Perovskites are considered the future of solar cells and are also predicted to play a significant role in next-gen electric vehicle batteries, displays, sensors, lasers and much more.

Perovskites can have an impressive collection of interesting properties including “colossal magnetoresistance” - their electrical resistance changes when they are put in a magnetic field (which can be useful for microelectronics). Some Perovskites are superconductors, which means they can conduct electricity with no resistance at all. Perovskite materials exhibit many other interesting and intriguing properties. Ferroelectricity, charge ordering, spin dependent transport, high thermopower and the interplay of structural, magnetic and transport properties are commonly observed features in this family. Perovskites therefore hold exciting opportunities for physicists, chemists and material scientists.

What are LEDs?

A light-emitting diode (LED) is an electronic component that is essentially a two-lead semiconductor light source. It is a p–n junction diode that emits light upon activation by a voltage applied to the leads, which makes electrons recombine with electron holes within the device, releasing energy in the form of photons. This effect is called electroluminescence, and the color of the light is determined by the energy band gap of the chosen semiconductor.



LEDs’ advantages over incandescent light sources include lower energy consumption, longer lifetime, improved physical robustness, smaller size, and faster switching. Light-emitting diodes have become ubiquitous and are found in diverse applications in the aerospace and automotive industries, as well as in advertising, traffic signals, camera flashes and much more.

LEDs meant for general room lighting currently remain more expensive than fluorescent or incandescent sources of similar output, but are significantly more energy efficient.

What can perovskites do for LEDs?

Current high-quality LEDs are based on direct bandgap semiconductors, but making these devices is no easy task because they need to be processed at high temperatures and in vacuum, which makes them rather expensive to produce in large quantities. Perovskites that are direct-bandgap semiconductors could be real alternatives to other types of direct-bandgap materials for applications like color displays, since they are cheap and easy to make and can be easily tuned to emit light of a variety of colours.

Perovskite hybrid organic-inorganic nanorods (HUJI)

Researchers have found that organometal halide-based perovskites (a combination of lead, organics and halogens that arrange into perovskite crystal structure in the solid state) could be very suitable for making optoelectronics devices, since they can be processed in solution and do not need to be heated to high temperatures. This means that large-area films of the these materials can be deposited onto a wide range of flexible or rigid substrates. The perovskites also have an optical bandgap that can be tuned in the visible to infrared regions, which makes them very promising for a range of optoelectronics applications. These materials also emit light very strongly, which makes them very suitable for making LEDs. The light emitted by the perovskites can be easily tuned, which could make them ideal for color displays and lighting, and in optical communication applications.

However, a major obstacle that perovskites will have to overcome in order to be used in LED-type devices is that electrons and holes only weakly bind in perovskite thin films. This means that excitons (electron-hole pairs) spontaneously dissociate into free carriers in the bulk recombination layer, leading to low photoluminescence quantum efficiency (PLQE), high leakage current and low luminous efficiency. This obviously impairs perovskites’ ability to create high-performance LEDs, and for perovskite materials to make a comparable impact in light emission, it is necessary to overcome their slow radiative recombination kinetics. Simply put, researchers will have to find ways of effectively confining electrons and holes in the perovskite so that they can “recombine” to emit light. Major progress is already being made in this field, and it seems that perovskites will indeed open the door to a low-cost, color-tunable approach to LED development.

Recent work in the field of perovskite-based LEDs

In July 2016, researchers at Nanyang Technological University in Singapore have fabricated high-performance green light-emitting diodes based on colloidal organometal perovskite nanoparticles. The devices have a maximum luminous efficiency of 11.49 cd/A, a power efficiency of 7.84 lm/W and an external quantum efficiency of 3.8%. This value is said to be about 3.5 times higher than that of the best colloidal perovskite quantum-dot-based LEDs previously made.

In March 2016, researchers at the University of Toronto in Canada and ShangaiTech University in China have succeeded in using colloidal quantum dots in a high-mobility perovskite matrix to make a near-infrared (NIR) light-emitting diode (LED) with a record electroluminescence power conversion efficiency of nearly 5% for this type of device. The NIR LED could find use in applications such as night vision devices, biomedical imaging, optical communications and computing.

In February 2016, researchers from the Universitat Jaume I and the Universitat de València have studied the interaction of two materials, halide perovskite and quantum dots, revealing significant potential for the development of advanced LEDs and more efficient solar cells. The researchers quantified the "exciplex state" resulting from the coupling of halide perovskites and colloidal quantum dots, both known separately for their optoelectronic properties, but when combined, these materials yield longer wavelengths than can be achieved by either material alone, plus easy tuning properties that together have the potential to introduce important changes in LED and solar technologies.

In December 2015, researchers at Pohang University in Korea are reportedly the first to develop a perovskite light emitting diode (PeLED) that could replace organic LED (OLED) and quantum dot LED (QDLED).

Organic/inorganic hybrid perovskite have much higher color-purity at a lower cost compared to organic emitters and inorganic QD emitters. However, LEDs based on perovskite had previously shown a limited luminous efficiency, mainly due to significant exciton (a complex of an electron and hole that can allow light emission when it is radiatively recombined) dissociation in perovskite layers. The research team overcame the efficiency limitations of PeLED and boosted its efficiency to a level similar to that of phosphorescent OLEDs. This increase was attributed to fine stoichiometric tuning that prevents exciton dissociation, and to nanograin engineering that reduces perovskite grain size, and concomitantly decreases exciton diffusion length. PeLED might be a game changer in the display and solid-state lighting industries, with significantly improved efficiency as well as advantages like excellent color gamut and low material cost.

In November 2015, Florida State researchers have developed a cheaper, more efficient LED, or light-emitting diode, using perovskites. The researchers spent months using synthetic chemistry to fine-tune the materials in the lab, creating a perovskite material capable of emitting a staggering 10,000 candelas per square meter when powered by 12 volts. The scientists say that such exceptional brightness owes, to a large extent, to the inherent high luminescent efficiency of this surface-treated, highly crystalline nanomaterial.

The latest perovskite LED news:

New method quantifies the efficiency of crystal semiconductors

Researchers at Tohoku University in Japan have found a new way to successfully detect the efficiency of crystal semiconductors. For the first time, the team used a specific kind of photoluminescence spectroscopy, a way to detect light, to characterize the semiconductors. The emitted light energy was used as an indicator of the crystal's quality. This method will potentially yield more efficient light-emitting diodes (LEDs), solar cells and several other advances in electronics.

Internal quantum efficiency of semiconducting crystals quantified by new method imageSchematic of the ARPL measurement technique

"For further development of perovskite-based devices, it is essential to quantitatively evaluate the absolute efficiency in high-quality perovskite crystals without assuming any predefined physical model is of particular importance," said corresponding author Kazunobu Kojima, Associate Professor at Tohoku University, Japan. "Our method is new and unique because previous methods have relied on efficiency estimation by model-dependent analyses of photoluminescence."

Mixing perovskite nanoparticles with 2D perovskites may give a boost to the efficiency of blue LEDs

Researchers from Zhejiang University, the Beijing Institute of Technology and Nanjing Tech University in China, Argonne National Laboratory in the U.S, University of Cambridge in the UK have combined perovskite nanoparticles with 2D perovskites to double the efficiency of blue LEDs.

Perovskite particle mix to push forward blue LEDs imageBromide perovskite films consisting of nanoparticles embedded within 2-D perovskite layers produce blue LEDs with a record-high efficiency of 9.5%

While the device only glows for a few minutes, the work is still considered “a big step toward the development of high-performance blue perovskite emitters” says Jianjun Tian of the University of Science and Technology in Beijing, who was not involved in the work. “The efficiency of these blue perovskite LEDs is already higher than that of the commercially available blue organic LEDs.”

Tokyo Tech team discovers a way to improve perovskite-based light-emitting diodes

Researchers at the Tokyo Institute of Technology (Tokyo Tech) have designed a new strategy to make efficient perovskite-based LEDs with improved brightness by leveraging the quantum confinement effect.

Photoluminescence and electroluminsecence in low-dimensional and 3D perovskite-based devices image(A) Photoluminescence and (B) electroluminsecence in low-dimensional and 3D perovskite-based devices

Devices that emit light when an electric current is applied, are referred to as electroluminescent devices, which have become orders of magnitude more efficient than the traditional incandescent light bulb. Light-emitting diodes (LEDs) make for the most notable and prevalent category of these devices. Many additional types of LEDs also exist.

Japanese team boosts the efficiency of perovskite LEDs

Researchers at the Tokyo Institute of Technology and Nihon University in Japan have explored a new approach using an exciton confinement effect to optimize highly efficient perovskite LEDs.

Japanese team improves perovksite LEDs imageThe structure of a large perovskite LED, where a layer of zinc oxide was deposited on the a-zinc silicate electron transport layer, providing greater brightness with better power efficiency. Credit: Tokyo Institute of Technology

To achieve an efficient electroluminescent device, the team required a high photoluminescence quantum yield emission layer, efficient electron hole injection and transport layers, and high light out-coupling efficiency. With each new advance in emission layer materials, new functional materials are required to realize a more efficient LED. To accomplish this goal, the authors of the study explored the performance of an amorphous zinc-silica-oxide system layered with perovskite crystals to improve the diode performance.

Chinese team reports PLQE of 70.3% in lead-free halide double perovskites

Researchers at the Dalian Institute of Chemical Physics at the Chinese Academy of Science have reported a series of bulk lead-free double perovskites which demonstrate the existence of parity-forbidden transition by photophysical characterization in Cs2AgInCl6 bulk crystal. The perovskites break the parity-forbidden transition and show warm white-light emission with broad emission across the entire visible spectrum, with the highest PLQE of 70.3%.

PLQE of 70.3% in lead-free halide double perovskites imageThe luminescence property of Cs2AgBi1-xInxCl6 (0 < x < 1) varied with increasing In content; the crystal structure of Cs2AgBi0.125In0.875Cl6 bulk crystal. Credit: Science China Press

The synthesized nanocrystals and microcrystals revealed that the PLQE decreases with the size decreasing, due to the enhancement of the PL quenching effect, caused by the increase of permanent defects. Furthermore, the Cs2AgBi0.125In0.875Cl6 bulk crystal possesses excellent stability. Therefore, it's promising as a new highly efficient warm white-light emitting material in LED applications.